SDY电竞|昇得源体育

销售热线:400-086-0537

如电话无法接通,请拨打集团 销售专员热线

热门搜索: 绞车 , 支柱 , 矿用门 , 锚杆 , 刮板机 , 自救器

耙矿绞车

耙矿绞车

简单可靠 装拆方便

耙(pa)矿绞车主要用于金属矿及其它矿场的坑内或露天做矿石搬运及充填工作。主要用于水平耙(pa)运,也可用于倾角不大的斜坡耙(pa)运,不能作为提升设备。司机可以在绞车旁用手操纵,也可以离绞车数米以至数十米处用按钮实行距离操纵。

Rake mine winch is mainly used for metal and other mine pit or open do ore handling and packing work. Mainly used for horizontal scraper, slope scraper can also be used to dip Angle is not big, not as a lifting equipment. Drivers can manipulate with the hand, beside the winch can also several meters to tens of meters away from the winch implement distance control with button.

金属矿及其它矿场的坑内及露天场所

水平及倾斜度不大的工作面上作矿物耙(pa)运填充工作

Used for metal and other mine pit and open Spaces,
and on the level and slope is work for mineral scraper and filling work

部分组成

Part of the

耙矿绞车由绞车,耙斗,滑轮三大主要部分组成。

Rake mine hoist winch, scraper, roller of three main parts.

耙(pa)矿绞车的主体是电动绞车,它通过工作卷筒和空载卷筒缠绕的钢丝绳牵引着一个耙(pa)斗,耙(pa)斗在工作面上铲满矿物并完成搬运到另外一个地方的工作。由于矿物直接在底部上耙(pa)运,阻力很大,因而耗电量很大;又由于耙(pa)矿绞车本身的结构条件所限,它只适用于水平及小于50度倾斜面的工作场合,不能用于提升、下放重物和运送人员。

Rake is the main body of mine hoist electric winch, it through the work roll and empty drum winding rope pulling a scraper, scraper shovel full minerals on the surface of the work and complete the move to another place to work. Due to mineral directly on the bottom of the scraper, the resistance is very big, and power consumption greatly; And due to the limitation of rake structure condition of the mine winch, it is only applicable to horizontal and inclined plane is less than 50 degrees workplace, cannot be used for raising and lowering the weight and shipping personnel.

主要构成

MAIN COMPONENTS

保护支撑 全部载荷

Protect the support the full load
Rake mine winch has reduction gear, main drum, drum, controlling device, steel rope guide, and motor.
These parts are both inside and outside the shell, shell parts is one who has a good rigidity,
Both protection and support role, and bear all the load.

保护支撑 全部载荷

Protect the support the full load

耙矿绞车有减速装置、主卷筒、副卷筒、操纵装置、钢绳导向装置和电动机。

Rake mine winch has reduction gear, main drum, drum, controlling device, steel rope guide, and motor.

parts

部件分别装在壳体内外

耙(pa)矿绞车的部件壳体具有较好钢性

Rake mine hoist parts shell has good rigidity

Rake mine winch has reduction gear, main drum, drum, controlling device,
steel rope guide, and motor.these parts are both inside and outside the
shell, shell parts is one who has a good rigidity,both protection and
support role, and bear all the load.
耙矿绞车

用螺栓固定在与基础相连的二根滑道上

Bolted on connected to the base of two ways

双筒绞车

双筒绞车:一个主卷筒,一个副卷筒

一个主卷筒(装在右侧,即靠近电动机的一侧)
一个副卷筒(装在左侧)

On the right side, near the side of the motor, on the left side

三筒绞车:一个主卷筒,二个副卷筒

一个主卷筒(装在中间), 二个副卷筒(装在左边和右边)

A primary drum (in middle), two deputy drum (on the left and right)
双筒绞车

三筒绞车也可以装二个主卷筒(装在右侧和中间),一个副卷筒(装在左侧),每一个卷筒都相应
有一个操纵装置和一个钢绳导向装置。

Three drum winch also can hold two main drum (on the right, and center), a pair of drum (left) in each drum has a corresponding control device and a steel rope guide.

耙矿绞车介绍(以2JPB-7.5为例)

2:钢丝绳卷筒得数量; J:卷扬机类; P:耙(pa)矿绞车; B:防爆; 7.5:电动机的功率。

2: wire rope drum number; J: hoist class; P: rake mine winch; B: explosion-proof; 7.5: the power of the motor.
耙矿绞车 耙矿绞车

分类及型号意义

Classification and model significance

耙矿绞车型号

2JPB-7.5,2JPB-15,2JPB-22,2JPB-30

Technical parameters

技术参数

型号 2JPB-7.5 2JPB-15
主钢丝绳平均拉力:kn 8 15
主钢丝绳平均速度:m/s 1.1 1.1
副钢丝绳平均速度:m/s 1.5 1.5
主钢丝绳直径:mm 9.3 12.5
副钢丝绳直径:mm 9.3 11
卷筒直径:mm 205 250
卷筒轮缘直径:mm 350 435
卷筒:mm 80 125
耙斗容:m3 0.25 0.25
外形尺寸:mm 1210*565*490 1525*660*620
重量:kg 90 672
耙矿绞车

耙矿绞车的使用和维护

Use and maintenance of rake mine winch

因产品生产批次、具体型号不同,图片仅供参考详情可联系,我们的销售人员进行具体核实

On the basis of different product production batch, specific models, pictures are for reference only details you can contact
our sales staff for specific verification

一、钢丝绳的损坏

由于采场工作条件较劣,钢丝绳与矿物接触而产生摩擦,这仅是造成钢丝绳磨损的原因之一。而钢丝绳在卷筒上不规则缠绕,挤压致坏是另一个不可忽视的原因。道理很简单,前一层缠绕较松弛,后一层缠绕较紧时,则上层钢丝绳必压入下一层钢丝绳间隙中,造成挤压钢丝绳,甚至将下一层钢丝绳挤偏。另一方面,由于缠绕松弛,钢丝绳易弯曲打结,不易拉直,也加速钢丝绳的损坏。

★解决办法:一是尽量规则缠绕,二是当发现不规则缠绕时,司机应将耙斗退回后重新缠绕。

二、减速器发热或齿轮损坏

由于采场照明条件较差,减速器放油孔或其他部位漏、渗油时,不易被发现,造成缺油甚至无油运转,致使减速器发热甚至将传动齿轮损坏。

★建议:绞车制造部门在减速器上增设油位指示装置。司机应经常检查,以便保证减速器有足量的润滑油。

上一个产品:稳车
下一个产品:2JP15耙矿绞车

产品分类

路面机械
石油设备
耐高温产品
排水设备
润滑油
水利设备
环保设备
农用飞机
除雪设备
3D打印机
园林机械
仪器仪表
矿用门
安防救援设备

耙矿绞车相关产品

产品评论

孙经理

电话: 186****3795

评论:很信任神华,就喜欢和讲诚信的厂家合作。

神华机械客服:非常感谢您对我们的评价,山东神华机械制造有限公司全体员工将继续秉承“信誉是生命质量求生存”的发展理念,坚持以客户为中心、与客户共赢的经营理念,为国内外新老客户服务!

李经理

电话: 176****3205

评论:之前购买的设备用的很满意,以后希望和贵公司多多合作。

神华机械客服:非常感谢您对我们的评价,山东神华机械制造有限公司全体员工将继续秉承“信誉是生命质量求生存”的发展理念,坚持以客户为中心、与客户共赢的经营理念,为国内外新老客户服务!

王经理

电话: 138****2685

评论:该产品的质量我很满意,赞一个

神华机械客服:非常感谢您对我们的评价,山东神华机械制造有限公司全体员工将继续秉承“信誉是生命质量求生存”的发展理念,坚持以客户为中心、与客户共赢的经营理念,为国内外新老客户服务!

评分:
联系人:   必填  
电话:   必填
内容:   必填
 

神华机械支付宝小程序店铺